SATO GY412 Operator's Manual page 115

3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
Display
Onscreen
message
Operation
button
GY412 Operator Manual
Service Mode - VR setting
OFFSET VOLUME
PITCH +0.00 mm
OFFSET +25 mm
DARKNESS 50
Button
ENTER
CANCEL
FUNCTION
Service Mode - Password setting
SET PASSWORD
ON
OFF
Button
↓, ↑
ENTER
CANCEL
FUNCTION
Section 3: Operation and Configuration
This screen indicates the VR setting values on
the main PCB.
Displaying the following adjustment values.
"PITCH" : Shows the value of print offset volume
on both upper and lower surfaces.
"OFFSET" : Shows the value of cut offset volume.
"DARKNESS" : Shows the value of darkness vol-
ume.
Description
Goes to the [SET PASSWORD] screen.
Goes to the [SERVICE MODE] screen.
Goes to the [SERVICE MODE] screen.
Enabling/Disabling password entry when entering
each mode.
Use ← and → keys to move the cursor and press
ENTER.
The default setting is "OFF".
Description
Moves the cursor.
"ON": Goes to the [PASSWORD NO] screen.
"OFF": Saves the setting and goes to the [SER-
VICE MODE] screen.
Goes to the [OFFSET VOLUME] screen without
saving the setting.
Goes to the [SERVICE MODE] screen without
saving the setting.
Page 3-87