Level Adjustment - SATO GY412 Operator's Manual

Section 6: Basic Specifications
6.1 PRINTER BASIC SPECIFICATIONS (CONT'D)
ITEM
CE adjustment
Factory adjustment
User adjustment
ITEM
Paper length detection sensor
Various sensors
Other settings
Buzzer
Operability
Toughness
Durability
Standard accessories
Page 6-12
(1) I-mark sensor level adjustment
(2) GAP sensor level adjustment
(1) Factory print position adjustment (through LCD screen)
(1) Print darkness adjustment (through LCD screen)
(2) Print position adjustment (through LCD screen)
(3) Cutter and tear-off stop position adjustment (through LCD screen)
(1) I-mark sensor (Reflective type)
(2) GAP sensor (Transmissive type)
(1) Cover open sensor
(2) Cutter sensor
(3) Head up/down sensor
Print speed, print darkness, and various offset settings can be configured through
the computer using the printer setting tool or can be configured through the printer
LCD screen.
Built-in buzzer
* Buzzer can be ON/OFF by the command specification
* Volume control function available (VR setting)
(1) Easy label loading (Label feed from the rear upper)
(2) Automatic label feed function
(3) Power switch located on the front side
(4) Easy operation. Vertical motion structure for opening/closing thermal head.
(5) Easy cleaning of head and platen roller
Unpackaged product drop impact not acceptable
Vibration and drop test of packaged product equivalent to ISTA-2A
Platen: 50km guaranteed
Thermal head: 30km guaranteed
Belt: 50km guaranteed
Motor: 20,000 hours guaranteed
(1) Quick Guide booklet
(2) Thermal head cleaning sheet
(3) Power cable
(4) Warranty
(5) Accessory CD-ROM

LEVEL ADJUSTMENT

DESCRIPTION
GY412 Operator Manual