SATO GY412 Operator's Manual page 111

3.3 LCD MESSAGE DETAILS (CONT'D)
Display
Onscreen
message
Operation
button
GY412 Operator Manual
Default Setting Mode - Confirmation of protocol code initialization
DEFAULT
ALT. PROTOCOL
YES
NO
Button
←, →
ENTER
CANCEL
FUNCTION
Section 3: Operation and Configuration
This is a confirmation screen for initializing proto-
col code.
Use ← and → keys to move the cursor and press
ENTER.
Select "YES" and press ENTER to initialize the
protocol code.
The initial cursor position is "NO".
Description
Moves the cursor.
"YES": Starts initializing protocol code.
"NO": Goes to the [DEFAULT MODE] screen
without initializing.
Goes to the [DEFAULT MODE] screen without ini-
tializing.
Goes to the [DEFAULT MODE] screen without ini-
tializing.
Page 3-83