SATO GY412 Operator's Manual page 105

3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
3.3.1.12 Test Print Mode
Display
Onscreen
message
Operation
button
GY412 Operator Manual
Memory Card Mode - Completion of SD card formatting
SD CARD FORMAT
NO
COMPLETED
Button
ENTER
Test Print Mode - Selection of test print pattern
TEST PRINT MODE
CONFIGURATION
BARCODE
MEMORY
FONT FACTORY
Button
↓↑
ENTER
Section 3: Operation and Configuration
This screen shows the completion of SD card for-
matting.
The buzzer emits 3 beeps when the SD card is
formatted.
Press ENTER to go to the [ONLINE MODE]
screen.
Description
Goes to the [ONLINE MODE] screen.
Selecting the type of test print.
Use ↑ and ↓ keys to move the cursor and press
ENTER.
"CONFIGURATION " : Prints out the printer con-
figurations.
"BARCODE" : Prints out the list of barcodes sup-
ported.
"HEAD CHECK" : Prints out head check pattern
of selected media size.
"MEMORY" : Prints out memory status.
"FONT" : Prints out the list of fonts supported.
"FACTORY" : Prints out factory setting informa-
tion.
Description
Moves the cursor.
"FONT" or "MEMORY": Goes to the [PITCH
POSITION] screen.
For other cases, goes to the [TEST PRINT SIZE]
screen.
Page 3-77