Operator Panel - SATO GY412 Operator's Manual

Section 3: Operation and Configuration

3.1 OPERATOR PANEL

Icons, instructions, and error messages are displayed on the Operator Panel on the top of the printer.
Display panel
Displays icons,
instructions and error
messages.
ENTER button
Registers set
contents.
Arrow buttons
Moves the cursor
and enters the
numeric value in
various modes.
FUNCTION button
Returns to the mode
selection screen.
LCD
This Liquid Crystal Display is a 128 dot x 64 dot graphic display.
This screen displays various messages.
Up to five icons and two lines of alphanumeric text can appear on the LCD display to indicate the current
printer status.
The same area can also display two lines of alphanumeric text during various setting modes.
STATUS LED
Green light is on when ONLINE.
Light is off when OFFLINE or when there is an error.
Green light blinks when detecting buffer near full.
Power saving function (LCD backlight is OFF): Light blinks at 2-second intervals.
ERROR LED
This light is red solid or blinking when it detects a printer error.
Page 3-2
STATUS LED
Green: The printer is in operation.
OFF: The printer operation is
paused.
CANCEL button
Cancels print data.
Returns to the
previous screen.
ERROR LED
Red light turns on or
blinks when an error
has occurred.
LINE button
Acts as the print
start/stop toggle button.
Acts as the data
transmission ON/OFF
toggle button.
FEED button
Feeds the label. Press once to
feed one blank label.
When the label is not at the right
position after setting the label,
press the LINE button to go
offline, and then, press the
FEED button to automatically
adjust the label position
to its top of form position.
GY412 Operator Manual