Head Position (Up And Down) - SATO GY412 Operator's Manual

Section 8: Appendix

8.5 HEAD POSITION (UP AND DOWN)

If you are inserting the label while no label is set, the printer will adjust the print position and match the top of
label with the print standby position automatically. Close the lower head assembly only when feeding the
label.
For the print operation, close the lower head assembly first, and then feed the label before closing the upper
head assembly.
Print operation after auto feed / Print operation with backfeed motion
No label
Close the lower head
The upper head starts to close after
printing some labels
Close the upper head before the print
start position of the upper surface
comes to the head position. If the
print start position is adjusted, the
print job will start.
Page 8-12
Upper head Lower head
Pitch sensor
Up
Down
Up
Down
Up
Down
Up
Down
GY412 Operator Manual