SATO GY412 Operator's Manual page 216

Section 8: Appendix
8.10 PRINT OPERATION SEQUENCE (cont'd)
Finished the print of the second
label
Feed to cut position
Cut the second label
Head check is executed during
backfeed motion
Waiting
Notes:
• In the above diagram, 1 label = print data length.
• Send the print data for two labels. Head check is specified for the last item.
(2) Timing chart
Power ON
Label feed
Upper head
motion
Lower head
motion
Label cut
Upper/Lower
heads check
Printer motion
Page 8-34
Cut position Upper head
Head check
st
Prints the 1
Backfeed
label (Lower)
Lower head Pitch sensor
nd
Prints the 2
Label feed to
label (Lower)
cut position
nd
Prints the 2
st
Prints the 1
label (Upper)
label (Upper)
Up
Down
Up
Down
Up
Down
Up
Down
Up
Down
Backfeed
GY412 Operator Manual