SATO GY412 Operator's Manual page 57

3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
3.3.1.5 Adjustment Screen
Display Adjustment screen - Adjustment of print start position on the upper surface
Onscreen
message
Operation
button
GY412 Operator Manual
Normal Mode - Cancellation of print job
CANCEL PRINT JOB
YES NO
PITCH POSITION
UPPER
+0.00 mm
Button
↓, ↑
ENTER
CANCEL
FUNCTION
Section 3: Operation and Configuration
This message appears when the print data is
cleared completely.
Goes to the OFFLINE screen after displaying this
message about 3 seconds.
This adjusts the print position on the upper sur-
face.
Use the arrow buttons to change setting value
and press ENTER.
The setting value can be adjusted by ±0.25 mm
regardless of print density.
The setting range is ±3.75 mm and the default
setting is +0.00 mm.
Description
Enters setting value by ±0.25 mm.
Saves the setting and goes to the OFFSET POSI-
TION screen.
Goes to the OFFLINE screen without saving the
setting.
Goes to the OFFLINE screen without saving the
setting.
Page 3-29