SATO GY412 Operator's Manual page 108

Section 3: Operation and Configuration
3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
Display
Onscreen
message
Operation
button
Page 3-80
Test Print Mode - Darkness setting
DARKNESS
50
ENTER -> PRINT
Button
↓, ↑
←, →
ENTER
CANCEL
FUNCTION
Test Print Mode - Pausing test print
TEST PRINT
ENTER -> STOP
Button
ENTER
CANCEL
FUNCTION
Adjusting print darkness.
Use ↑ and ↓ keys to change setting value and
press ENTER to start test print.
The setting value can be adjusted by 1 regardless
of print density.
The setting range is from 00 to 90.
The default setting is "50".
Description
Enters setting value by ±1.
Toggles the screens.
Starts test print.
Goes to the [TEST PRINT SIZE] screen.
Goes to the [TEST PRINT MODE] screen.
This screen shows that test print is in progress.
Ongoing test print will be paused temporarily by
pressing ENTER.
Description
Starts/Pauses test print.
Goes to the [TEST PRINT MODE] screen.
Goes to the [TEST PRINT MODE] screen.
GY412 Operator Manual