SATO GY412 Operator's Manual page 64

Section 3: Operation and Configuration
3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
Page 3-36
User Mode - Adjustment of cut position
CUTTER OFFSET
+0000 dot
Button
↓, ↑
→, ←
ENTER
CANCEL
FUNCTION
This adjusts the base point for paper cutting.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor and select
an input item.
Can be set by 1 dot. The default setting is "+0000
dot" regardless of print density.
Setting range: ±0 to 0045
Description
Enters setting value.
Move the cursor to + and - for its switch over.
Moves the cursor.
Saves the setting, and goes to the ZERO SLASH
screen.
Goes to the PITCH OFFSET LOWER HEAD
screen without saving the setting.
Goes to the ONLINE MODE screen, without sav-
ing the setting.
GY412 Operator Manual