Rs-232C Serial Interface - SATO GY412 Operator's Manual

7.3 RS-232C SERIAL INTERFACE

7.3.1 Basic Specifications
The interface of this printer complies with RS-232C.
Enter the interface mode of the printer or use the printer setting tool for setting up.
7.3.2 Basic Specifications of RS-232C Serial Interface
This interface complies with the RS-232C standard.
Interface connector
Interface connector
Communication
settings
GY412 Operator Manual
RS-232C
Printer side DB-9S or equivalent (Female)
Cable side DB-9P or equivalent (Male)
Use Printer configuration tool to setup.
Standard installation is required.
Section 7: Interface Specifications
Page 7-3