Section 3: Operation and Configuration
3.3 LCD MESSAGE DETAILS (cont'd)
Display
Adjustment screen - Adjustment of print start position on the lower surface
Onscreen
message
Operation
button
Display
Onscreen
message
Operation
button
Page 3-30
PITCH POSITION
LOWER
mm
+0.00
Button
↓, ↑
ENTER
CANCEL
FUNCTION
Adjustment screen - Adjustment of offset (cut/tear-off) position
OFFSET POSITION
+0.00
mm
Button
↓, ↑
ENTER
CANCEL
FUNCTION
This adjusts the print position on the lower sur-
face.
Use the arrow buttons to change setting value
and press ENTER.
The setting value can be adjusted by ±0.25 mm
regardless of print density.
The setting range is ±3.75 mm and the default
setting is +0.00 mm.
Description
Enters setting value by ±0.25 mm.
Saves the setting and goes to the OFFSET POSI-
TION screen.
Goes to the OFFLINE screen without saving the
setting.
Goes to the OFFLINE screen without saving the
setting.
This adjusts the offset (cut/tear) position.
Use the arrow buttons to change setting value
and press ENTER.
The setting value can be adjusted by ±0.25 mm
regardless of print density.
The setting range is ±3.75 mm and the default
setting is +0.00 mm.
Description
Enters setting value by ±0.25 mm.
Saves the setting and goes to the Darkness
screen.
Goes to the OFFLINE screen without saving the
setting.
Goes to the OFFLINE screen without saving the
setting.
GY412 Operator Manual