3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
GY412 Operator Manual
Interface Mode - LAN communication protocol setting
PROTOCOL
STATUS4
STATUS5
STATUS3
Button
↓,↑, ←, →
ENTER
CANCEL
FUNCTION
Section 3: Operation and Configuration
Setting communication protocol.
Press ENTER.
The default setting is "STATUS4".
Description
Moves the cursor.
"STATUS4" : Saves the setting and goes to the
[STATUS REPLY TIMING] screen.
"STATUS5" : Save setting value and goes to the
[ITEM NO CHECK] screen.
"STATUS3" : Saves the setting and goes to the
[ONLINE MODE] screen.
Goes to the [INTERFACE PORT] screen without
saving the setting.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Page 3-49