SATO GY412 Operator's Manual page 101

3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
GY412 Operator Manual
Advanced Mode - Selection of SEMBL start program
START PROGRAM
XXXXXXXX.BAS
Button
↓, ↑
ENTER
CANCEL
FUNCTION
Section 3: Operation and Configuration
Selecting the program to be executed when start-
ing SEMBL Mode automatically.
Use ↑ and ↓ keys to move the cursor and press
ENTER.
Use ↑ and ↓ keys to move the cursor and press
ENTER.
"NONE" : Does not specify start program.
"XXXXXXXX.BAS" : Specifies start program.
The program name registered in the printer will
be shown in "XXXXXXXX.BAS".
The default setting is "NONE".
This message is displayed only when [SEMBL
MODE AUTO START] is set to "YES".
Description
Selects the program names registered in the
printer.
Saves the setting and goes to the [ONLINE
MODE] screen.
Goes to the [SEMBL MODE AUTO START] with-
out saving the setting.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Page 3-73