SATO GY412 Operator's Manual page 175

7.5 LOCAL AREA NETWORK (LAN) ETHERNET (cont'd)
7.5.6 TELNET Specifications
TELNET complies with RFC854. This consists of an interactive menu form, and it enables you to change and
refer internal setup and to display status. To change the setting details, enter 'root' user name and password
at the time of login. Default ROOT password is set to null (line feed only).
Each printer model name will appear in [Model Name].
For the detailed settings of [1:Setup TCP/IP], refer to [7.4.8 Setting/Displayed Items].
7.5.7 Setting/Displayed Items
The following table shows the section that can be set up and referred to, and the list of variables.
TCP/IP related settings
Variable name
IP address
Subnet mask
Gateway address
RARP protocol
DHCP protocol
Keep alive time
Socket cancel
ROOT password
GY412 Operator Manual
Setting range
0.0.0.0 ~ 255.255.255.255
0.0.0.0 ~ 255.255.255.255
0.0.0.0 ~ 255.255.255.255
ENABLE/DISABLE
ENABLE/DISABLE
30 ~ 300
Normal / compatible
Up to 16 optional alphanumeric char-
acter string
Section 7: Interface Specifications
Initial value (Factory default)
0.0.0.0 (Obtained externally)
0.0.0.0 (Derived from IP address)
0.0.0.0 (Invalid)
ENABLE
ENABLE
180 seconds
Normal
NULL (No password)
Page 7-11