SATO GY412 Operator's Manual page 74

Section 3: Operation and Configuration
3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
Page 3-46
Interface Mode - LAN port number 1 setting
PORT NUMBER1
01024
Button
↓,↑
←, →
ENTER
CANCEL
FUNCTION
Setting LAN port number 1.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor to an input
item.
The default setting is "01024".
Setting range is from "00000" to "65535".
[Important] Changed setting becomes effective at
next power-on.
Note: You cannot assign the number currently
used in "PORT NUMBER2" and "PORT
NUMBER3".
Description
Enters setting value.
Moves the cursor.
Saves the setting and goes to the [PORT
NUMBER2] screen.
If "MANUAL" is selected in [IP RESOLUTION
METHOD], it goes to the [GATEWAY ADDRESS]
screen without saving the setting.
If "DHCP" is selected in [IP RESOLUTION
METHOD], it goes to the [IP RESOLUTION
METHOD] screen without saving the setting.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
GY412 Operator Manual