Operator Panel - SATO GY412 Operator's Manual

Section 1: Introduction

1.4 OPERATOR PANEL

Icons, instructions, and error messages are displayed here.
Display panel
Displays icons,
instructions and error
messages.
ENTER button
Registers set
contents.
Arrow buttons
Moves the cursor
and enters the
numeric value in
various modes.
FUNCTION button
Returns to the mode
selection screen.
Page 1-6
STATUS LED
Green: The printer is in operation.
OFF: The printer operation is
paused.
CANCEL button
Cancels print data.
Returns to the
previous screen.
ERROR LED
Red light turns on or
blinks when an error
has occurred.
LINE button
Acts as the print
start/stop toggle button.
Acts as the data
transmission ON/OFF
toggle button.
FEED button
Feeds the label. Press once to
feed one blank label.
When the label is not at the right
position after setting the label,
press the LINE button to go
offline, and then, press the
FEED button to automatically
adjust the label position
to its top of form position.
GY412 Operator Manual