SATO GY412 Operator's Manual page 99

3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
Display
Onscreen
message
Operation
button
GY412 Operator Manual
Advanced Mode - Protocol code setting
PROTOCOL CODE
STANDARD
NON-STANDARD
Button
↓↑
ENTER
CANCEL
FUNCTION
Advanced Mode - LCD power saving setting
LCD POWER SAVING
05
Button
↓↑
ENTER
CANCEL
FUNCTION
Section 3: Operation and Configuration
Setting the LCD power saving timer.
Use ↑ and ↓ keys to change setting value and
press ENTER.
The setting range is from 00 to 15.
The default setting is "05".
Description
Enters setting value.
Saves the setting and goes to the [SEMBL MODE
AUTO START] screen.
Goes to the [PROTOCOL CODE] screen without
saving the setting.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Setting the LCD power saving timer.
Use ↑ and ↓ keys to change setting value and
press ENTER.
The setting range is from 00 to 15.
The default setting is "05".
Description
Enters setting value.
Saves the setting and goes to the [SEMBL MODE
AUTO START] screen.
Goes to the [PROTOCOL CODE] screen without
saving the setting.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Page 3-71