SATO GY412 Operator's Manual page 181

7.5 LOCAL AREA NETWORK (LAN) ETHERNET (cont'd)
Notes
For On-board LAN Interface
1.
For the Onboard LAN interface settings, refer to the GY412 Printer Interface Setup Quick Guide, and to the
network setting tool instructions on the SATO America, Inc. Internet site:
http://www.satoamerica.com
2.
When opening and closing the print main port (Port1024) and the status port (Port1025), wait for 150ms
and 200ms from the closing to the opening of the port to avoid a double connection. If the connect request
[CONNECT] is sent to the port already connected (Port1024, Port 1025), that request will be rejected
(Socket CLOSE).
3.
Inserting and removing the LAN cable while the computer is connected may result in a communication fail-
ure. Do not insert and remove the LAN cable while starting up the printer. Doing so may result in a
communication failure. Please restart the printer to recover from this error.
GY412 Operator Manual
Section 7: Interface Specifications
Page 7-17