SATO GY412 Operator's Manual page 118

Section 3: Operation and Configuration
3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
Display
Onscreen
message
Operation
button
Page 3-90
Test Print Mode - Adjustment of offset position
OFFSET POSITION
+0.00 mm
ENTER -> PRINT
Button
↓, ↑
←, →
ENTER
CANCEL
FUNCTION
Test Print Mode - Darkness setting
DARKNESS
50
ENTER -> PRINT
Button
↓, ↑
←, →
ENTER
CANCEL
FUNCTION
Adjusting offset position.
Use ↑ and ↓ keys to change setting value and
press ENTER to start test print.
The setting value can be adjusted by ±0.25mm
regardless of print density.
The setting range is ±3.75mm and the default set-
ting is "+0.00"mm.
Description
Enters setting value by ±0.25mm.
Toggles the screens.
Starts test print.
Goes to the [TEST PRINT SIZE] screen.
Goes to the [MAINTENANCE MODE] screen.
Adjusting print darkness.
Use ↑ and ↓ keys to change setting value and
press ENTER to start test print.
The setting value can be adjusted by 1 regardless
of print density.
The setting range is from 00 to 90.
The default setting is "50".
Description
Enters setting value by ±1.
Toggles the screens.
Starts test print.
Goes to the [TEST PRINT SIZE] screen.
Goes to the [MAINTENANCE MODE] screen.
GY412 Operator Manual