SATO GY412 Operator's Manual page 86

Section 3: Operation and Configuration
3.3 LCD MESSAGE DETAILS (cont'd)
Display
Onscreen
message
Operation
button
Display
Onscreen
message
Operation
button
Page 3-58
Interface Mode - RS-232C character bit setting
CHARACTER BIT
8BIT
7BIT
Button
←, →
ENTER
CANCEL
FUNCTION
Interface Mode - RS-232C communication protocol setting
PROTOCOL
STATUS4
STATUS5
STATUS3
Button
↓,↑, ←, →
ENTER
CANCEL
FUNCTION
Setting RS-232C character bit.
Use ← and → keys to move the cursor and press
ENTER.
The default setting is "8BIT".
[Important] Changed setting becomes effective at
next power-on.
Description
Moves the cursor.
Saves the setting and goes to the [PROTOCOL]
screen.
Goes to the [STOP BIT] screen without saving
the setting.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Setting communication protocol.
Press ENTER.
The default setting is "STATUS4".
Description
Moves the cursor.
"STATUS4" : Saves the setting and goes to the
[ONLINE MODE] screen.
"STATUS5" : Saves the setting and goes to the
[ITEM NO CHECK] screen.
"STATUS3" : Saves the setting and goes to the
[ONLINE MODE] screen.
Goes to the [INTERFACE PORT] screen without
saving the setting.
Goes to the [ONLINE MODE] screen without sav-
ing the setting.
GY412 Operator Manual