Section 8: Appendix
8.1 CUTTER AND PRINTER MOTION
The cutter should only be installed by SATO qualified servicing personnel.
8.1.1 Cutter Specifications
Print speed: Complies with the printer specifications (3 to 10 inch/sec)
Paper type: Complies with the printer specifications
•
Do not cut on the line of perforation when using the perforated labels
Paper size:
Width: W52 to W132 mm (Backing paper size)
Pitch: P33 to P303 mm (Backing paper size)
Thickness: 100 to 320 μm (Adhesive side 100 to 260μm)
Cutter unit maker: OYANE RIKI MFG. CO., LTD.
Unit type: ORC-FSRB6-2
Unit structure: Swing-type
Self-diagnostic function
Detection of cutter motion error
Dimensions: W180.5 mm x D49.1 mm x H102.9 mm
Weight: 1.2 kg
Guaranteed cutter life: 200,000 cuts
Other:
Remove the front and side covers to install the cutter unit.
Replace the original guide bracket with the cutter unit.
•
A screwdriver is required.
•
Connect the connector after removing the side cover.
Page 8-2
GY412 Operator Manual