Unpacking - SATO GY412 Operator's Manual

Section 1: Introduction
1.1 FEATURES OF THE PRINTER, CONT'D
The key features of the GY412 are:
• High print resolution (305 dpi)
• Operational benefits - It can reduce the risk of mismatching packing slip
• Easy label loading
• Power switch located on front of printer
• Easy operation
• Operating modes: Continuous, Tear-off, Cutter, or Print-Cut.
• Easy to open or close the thermal print heads
• Easy to clean print heads and print roller
• Lower cost - eliminates the need for additional printers
• Environment-friendly: Depending upon the application, the media and application can use a single liner,
reducing waste
• Interface options: RS232C, USB 2.0, LAN (10/100 BaseT)
• 16 MB SDRAM, 16 MB Flash ROM, SD card slot
• Label cutter

1.2 UNPACKING

When unpacking the printer, take note of the following:
1. The box should stay right-side up.
Lift the printer out of the box carefully.
2. Remove all the packaging from the printer.
3. Remove the accessory items from their protective containers.
4. Set the printer on a solid, flat surface. Inspect the shipping container and printer for any sign of damage
that may have occurred during shipping. Please note that SATO shall hold no liability of any damage of any
kind sustained during shipping of the product.
Notes
• If the printer has been stored in the cold, allow it to reach room temperature before turning it on.
• Please do not discard the original packaging box and cushioning material after installing the printer. They
may be needed in future, if the printer needs to be shipped for repairs.
1.2.1 Included Accessories
If there are any accessories missing, contact your SATO reseller or technical support center.
After unpacking the printer, verify that you have the following materials:
• Global warranty
• Power cable
Page 1-2
GY412 Operator Manual