Unconfigure Tunnel - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IPv6 Unicast Commands

unconfigure tunnel

unconfigure tunnel <tunnel_name> ipaddress <ipv6_address_mask>
Description
Unconfigures an IPv6 address/prefix route from a tunnel.
Syntax Description
tunnel_name
ipv6_address_mask
Default
N/A.
Usage Guidelines
This command will unconfigure an IPv6 address/prefix route from the specified tunnel.
Example
The following command unconfigures the 6in4 tunnel link39 with the address 3aaa::1111/64
unconfigure tunnel link39
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1462
Specifies an IPv6 tunnel.
Specifies an IPv6 address / IPv6 prefix length.
3aaa::1111/64
ExtremeWare XOS 11.5 Command Reference Guide