show system login
Use this command to display user login account information.
Syntax
show system login
Parameters
None.
Defaults
None.
Mode
Switch command, super user.
Example
This example shows how to display login account information. In this case, switch defaults have
not been changed:
G3(su)->show system login
Password history size: 0
Password aging
Username
admin
ro
rw
Table
2‐1 provides an explanation of the command output.
Table 2-1 show system login Output Details
Output Field
Password history size
Password aging
Username
Access
State
set system login
Use this command to create a new user login account, or to disable or enable an existing account.
The G‐Series switch supports up to 16 user accounts, including the admin account, which cannot
be deleted.
: disabled
Access
State
super-user
enabled
read-only
enabled
read-write
enabled
What It Displays...
Number of previously used user login passwords that will be checked for
duplication when the set password command is executed. Configured with
system password history (page
Number of days user passwords will remain valid before aging out. Configured
with
set system password aging (page
Login user names.
Access assigned to this user account: super-user, read-write or read-only.
Whether this user account is enabled or disabled.
2-7).
2-6).
Enterasys G-Series CLI Reference 2-3
show system login
set