Trunk View Window - Altigen AltiWare OE/ACC Version 5.0 Administration Manual

Getting Around AltiAdmin
You can click the Reset button without selecting an extension, and then
type in the extension number for the extension to reset.

Trunk View Window

The Trunk View window displays the status of all assigned trunks.
Figure 5. Trunk View window
The radio button to the left of each trunk location is green when the trunk
is idle, and red when the extension is not ready or in use. The location
format is slot:channel—for example, channel 3 on the board in slot 9 is
location 09:03.
You can double click any trunk location to open the Trunk Configuration
window for the selected trunk.
AltiWare OE System Installation & Administration Manual 4-7