Connection: Isdn Bri - Cisco ROUTER-SDM-CD User Manual

Connection: ISDN BRI

Connection: ISDN BRI
Encapsulation
ISDN Switch Type
SPIDs
Cisco Router and Security Device Manager 2.5 User's Guide
6-48
Complete these fields if you are configuring an ISDN BRI connection. Because
Cisco SDM supports only PPP encapsulation over an ISDN BRI connection, the
encapsulation shown is not editable.
PPP chosen.
Choose the ISDN switch type. Contact your ISDN service provider for the switch
type for your connection.
Cisco SDM supports these BRI switch types:
For North America:
•
basic-5ess—Lucent (AT&T) basic rate 5ESS switch
–
basic-dms100—Northern Telecom DMS-100 basic rate switch
–
basic-ni—National ISDN switches
–
For Australia, Europe, and the UK:
•
basic-1tr6—German 1TR6 ISDN switch
–
– basic-net3—NET3 ISDN BRI for Norway NET3, Australia NET3, and
New Zealand NET3switch types; ETSI-compliant switch types for
Euro-ISDN E-DSS1 signaling system
vn3—French ISDN BRI switches
–
For Japan:
•
ntt—Japanese NTT ISDN switches
–
For Voice/PBX systems:
•
basic-qsig—PINX (PBX) switches with QSIG signaling per Q.931 ()
–
Click if you need to enter service profile ID (SPID) information.
Chapter 6 Edit Interface/Connection
OL-4015-12