Table of Contents
Advertisement
Chapter 4
802.1x Authentication
Radius Server Timeout
Supplicant Reply Timeout
Supplicant Retries Timeout
Quiet Period
Rate Limit Period
Maximum Reauthentication Attempts
Maximum Retries
OL-4015-12
Enter the time, in seconds, that your Cisco IOS router waits before timing out its
connection to the RADIUS server. Values must be in the range of 1–65535
seconds. The default setting is 30 seconds.
Enter the time, in seconds, that your Cisco IOS router waits for a reply from an
802.1x client before timing out its connection to that client. Values must be in the
range of 1–65535 seconds. The default setting is 30 seconds.
Enter the time, in seconds, that your Cisco IOS router retries an 802.1x client
before timing out its connection to that client. Values must be in the range of
1–65535 seconds. The default setting is 30 seconds.
Enter the time, in seconds, that your Cisco IOS router will wait between the initial
connection to a client and when a login request is sent. Values must be in the range
of 1–65535 seconds. The default setting is 60 seconds.
Values must be in the range of 1–65535 seconds. However, the default setting is
0 seconds, which turns off Rate Limit Period.
Enter the maximum number of times your Cisco IOS router tries to reauthenticate
an 802.1x client. Values must be in the range 1–10. The default setting is 2.
Enter the maximum number of login requests that can be sent to the client. Values
must be in the range 1–10. The default setting is 2.
Cisco Router and Security Device Manager 2.5 User's Guide
LAN Wizard: 802.1x Authentication (Switch Ports)
4-3
Advertisement
Table of Contents
Troubleshooting
