Cisco ROUTER-SDM-CD User Manual page 801

Chapter 36 Router Provisioning
Guidelines
Troubleshooting Tips
OL-4015-12
When SDP is launched, you must minimize the browser window displaying
•
this help topic so that you can view the SDP web application.
If you are planning to configure the router using SDP, you should do so
•
immediately after configuring your WAN connection.
When you complete the configuration changes in SDP, you must return to
•
Cisco SDM and click Refresh on the toolbar to view the status of the
trustpoint in the Router Certificates window in the VPN Components tree.
These recommendations involve preparations on the local router and on the
server. You need to communicate these requirements to the administrator of the
CA server. Ensure the following:
The local router and the CA server have IP connectivity between each other.
•
The local router must be able to ping the certificate server successfully, and
the certificate server must be able to successfully ping the local router.
The CA server administrator uses a web browser that supports JavaScript.
•
The CA server administrator has enable privileges on the local router.
•
The firewall on the local router will permit traffic to and from the certificate
•
server.
• If a firewall is configured on the Petitioner and/or on the Registrar, you must
ensure that the Firewall permits HTTP or HTTPS traffic from the PC from
which the Cisco SDM /SDP application is invoked.
For more information about SDP, see the following web page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_gui
de09186a008028afbd.html#wp1043332
Cisco Router and Security Device Manager 2.5 User's Guide
SDP Troubleshooting Tips
CA
36-3