Cisco ROUTER-SDM-CD User Manual page 279

Chapter 11 Site-to-Site VPN
Add Button
Delete Button
Test Tunnel.. Button
Clear Connection Button
OL-4015-12
Transform Set
This shows the name of the
transform set names are separated by commas. A transform set specifies the
algorithms that will be used to encrypt data, ensure data integrity, and provide
data compression. Both peers must use the same transform set, and they negotiate
to determine which set they will use. Multiple transform sets may be defined to
ensure that the router can offer a transform set that the negotiating peer will agree
to use. The transform sets is a component of the IPSec policy.
IPSec Rule
The rule that determines which traffic should be encrypted on this connection.
The IPSec rule is a component of the IPSec Policy.
Type
One of the following:
Static—This is a static site-to-site VPN tunnel. The VPN tunnel uses static
•
crypto maps.
Dynamic—This is a dynamic site-to-site VPN tunnel. The VPN tunnel uses
•
dynamic crypto maps.
Click to add a VPN connection
Click to delete a selected VPN connection
Click to test a selected VPN tunnel.The results of the test will be shown in another
window.
Click to reset an established connection to a remote peer. This button is disabled
if you have selected a dynamic site-to-site VPN tunnel.
Cisco Router and Security Device Manager 2.5 User's Guide
transform set used by this VPN connection. Multiple
Edit Site-to-Site VPN
11-25