Cisco ROUTER-SDM-CD User Manual page 319

Chapter 12 Easy VPN Remote
Table 12-8 Add or Edit Easy VPN Remote Fields
Element
Group Key
Confirm Key
Interfaces
Outside Interface Toward Server
or Concentrator
Inside Interfaces
Add or Edit Easy VPN Remote: General Settings
Note
OL-4015-12
Description
Enter the IPSec group password. The group password must match
the group password defined on the VPN concentrator or server.
Obtain this information from your network administrator.
Reenter the group password to confirm.
Choose the interface that has the connection to the Easy VPN server
or concentrator.
Cisco 800 routers do not support the use of interface E 0 as
Note
the outside interface.
Specify the inside interfaces to include in this Easy VPN
configuration. All hosts connected to these interfaces will be part of
the VPN. As many as three inside interfaces are supported on Cisco
800 series and Cisco 1700 series routers.
An interface cannot be designated as both an inside
Note
interface and an outside interface.
Use this Window to configure your router as an Easy VPN client. Your router must
have a connection to an Easy VPN concentrator or server on the network.
This window appears if the Cisco IOS image on your router supports Easy VPN
Client Phase IV.
Cisco Router and Security Device Manager 2.5 User's Guide
Administering Easy VPN Remote Connections
12-25