Cisco ROUTER-SDM-CD User Manual page 97

Chapter 5 Configuring WAN Connections
Table 5-14 PVC Fields
Element
VPI
VCI
Connection Type Parameter
ADSL
•
G.SHDSL
•
•
•
ADSL over
•
ISDN
OL-4015-12
Field Reference
Table 5-14 describes the fields in this screen.
Description
Enter the VPI value obtained from your service provider or system
administrator. The virtual path identifier (VPI) is used in ATM
switching and routing to identify the path used for a number of
connections. Enter the VPI value given to you by your service
provider.
Enter the VCI value obtained from your service provider or system
administrator. The virtual circuit identifier (VCI) is used in ATM
switching and routing to identify a particular connection within a
path that it may share with other connections. Enter the VCI value
given to you by your service provider.
Cisco IOS Default Values
The values shown in the following table are Cisco IOS defaults. Cisco SDM will
not overwrite these values if they have been changed during a prior configuration,
but if your router has not been previously configured, these are the values that will
be used
Operating mode
Operating mode
Line rate
Equipment type
Operating mode
Cisco Router and Security Device Manager 2.5 User's Guide
Value
Auto
•
Annex A (United States)
•
Auto
•
CPE
•
Auto
•
Configuring a DSL Connection
5-19