Cisco ROUTER-SDM-CD User Manual page 521

Chapter 21 Cisco IOS SSL VPN
Table 21-5 Creating a New SSLVPN
Cisco IOS SSL VPN Wizard Window
Create SSL VPN Window
Prerequisite Tasks area indicates that
digital certificates are not configured on
the router.
User clicks self signed certificate and
configures a certificate in the Persistent
Self Signed Certificate dialog. The user
does not change the Cisco SDM-supplied
name Router_Certificate.
User clicks Create new SSL VPN.
IP Address and Name Window
User enters the following information:
IP Address: 172.16.5.5
Name: Asia
Check Enable secure SDM access
through 192.168.1.1.
Certificate: Router_Certificate
User Authentication Window
OL-4015-12
Configuration
Cisco SDM configures a self-signed certificate named
"Router_Certificate" that will be available for use in all
Cisco IOS SSL VPN configurations.
Cisco SDM creates a context named "Asia."
Cisco SDM creates a gateway named "gateway_1" that
uses the IP address 172.16.5.5 and Router_Certificate. This
gateway can be associated with other Cisco IOS SSL VPN
contexts.
Users will access the Cisco IOS SSL VPN portal by
entering http://172.16.5.5/Asia. If this gateway is
associated with additional contexts, the same IP address
will be used in the URL for those contexts. For example if
the context Europe is also configured to use gateway_1,
users enter https://172.16.5.5/Europe to access the portal.
After the configuration is delivered to the router, users
must enter http://172.16.5.5:4443 to launch Cisco SDM
using this IP address.
Cisco SDM also begins to configure the first group policy,
named policy_1.
Cisco Router and Security Device Manager 2.5 User's Guide
Additional Help Topics
21-43