User Authentication (Xauth) - Cisco ROUTER-SDM-CD User Manual

Chapter 13 Easy VPN Server
Step 1
Step 2
Step 3
Step 4
Step 5

User Authentication (XAuth)

Table 13-14 User Authentication (XAuth) Fields
Element
XAuth Banner
Maximum Logins Allowed Per
User
OL-4015-12
Manually Configuring a Proxy Server
If you choose Manual Proxy Configuration, follow these steps to manually
configure a proxy server:
Enter the proxy server IP address in the Server IP Address field.
Enter the port number that proxy server uses for receiving proxy requests in the
Port field.
Enter a list of IP addresses for which you do not want clients to use the proxy
server.
Separate the addresses with commas, and do not enter any spaces.
If you want to prevent clients from using the proxy server for local (LAN)
addresses, check the Bypass proxy server for local address check box.
Click OK to save the browser proxy settings.
This allows you to configure additional attributes for user authentication, such as
Group Lock and save Password Attributes.
Field Reference
Table 13-14 describes the fields in this screen.
Description
Enter the text for a banner that is shown to users during XAuth
requests.
This feature appears only if supported by your Cisco
Note
server's IOS release.
Specify the maximum number of connections a user can establish at
a time. Cisco SDM supports a maximum of ten logins per user.
Cisco Router and Security Device Manager 2.5 User's Guide
Creating an Easy VPN Server Connection
13-17