Summary; Advanced Options - Cisco ROUTER-SDM-CD User Manual

Chapter 5 Configuring WAN Connections

Summary

Table 5-4 WAN Summary Buttons
Element
Test the connectivity after
configuring
To save this configuration to the router's running configuration and leave this wizard:

Advanced Options

OL-4015-12
This screen displays a summary of the WAN link that you configured.You can
review this information, and if you need to change anything, you can click the
Back button to return to the screen on which you need to make changes.
Button Reference
Table 5-4 describes the buttons in this screen.
Description
Check this box if you want Cisco SDM to test the connection you
have configured after it delivers the commands to the router. Cisco
SDM will test the connection and report results in another window.
Click Finish. Cisco SDM saves the configuration changes to the router's running
configuration. The changes will take effect immediately, but will be lost if the
router is turned off.
If you checked Preview commands before delivering to router in the Cisco
SDM Preferences window, the Deliver window appears. In this window, you can
view the CLI commands that you are delivering to the router.
There are two advanced options available, based on the router's configuration:
Default static route, and Port Address Translation (PAT). If the Static Route
option is not visible in the window, a static route has already been configured on
the router. If the PAT option is not visible, PAT has already been configured on an
interface.
Field Reference
Table 5-5 describes the fields in this screen.
Cisco Router and Security Device Manager 2.5 User's Guide
Configuring an Ethernet WAN Connection
5-5