Cisco ROUTER-SDM-CD User Manual page 689

Chapter 29 Quality of Service
Policing for Outbound Traffic
Table 29-4 Policing for Outbound Traffic Fields
Element
Configure policing for outbound traffic
Traffic Class
Committed Information Rate (CIR)
QoS Policy Generation
OL-4015-12
Configure policing for outbound traffic in this screen.
Field Reference
Table 29-4 describes the fields in this screen.
Description
If you want the QoS policy to include policing for
outbound traffic, check this option and enter values in the
configuration fields. Otherwise, click Next to proceed to
the next screen.
Policing causes packets that exceed the Committed
Information Rate (CIR) to be dropped.
This column lists the traffic classes included in this QoS
policy.
Enter the CIR for each traffic class. The bandwidth of the
link is listed at the bottom of the screen. Cisco SDM
displays a message if any entered value causes the total to
exceed the link bandwidth.
Use this window to allocate the bandwidth to the different types of traffic carried
on the selected interface. The percentage value that you enter represents 1000
Kbps. For example, if you enter 5%, a bandwidth of 5000 Kbps is allocated. The
total percentage value for all types of traffic excluding Best Effort cannot exceed
75%.
Cisco Router and Security Device Manager 2.5 User's Guide
Creating a QoS Policy
29-7