Table of Contents
Advertisement
Chapter 12
Easy VPN Remote
Step 8
Step 9
Step 10
Step 11
Create Easy VPN Remote Reference
OL-4015-12
Cisco SDM displays the Summary screen when you have completed the
configuration. Review the configuration. If you need to make changes, click Back
to return to the screen in which you need to make changes, then return to the
Summary screen.
If you want to test the connection after sending the configuration to the router,
check Test the connectivity after configuring. After you click Finish, Cisco
SDM tests the connection and displays the test results in another screen.
To send the configuration to the router, click Finish.
If you checked Preview commands before delivering to router in the Edit
Preferences screen, the Cisco IOS CLI commands that you are sending are
displayed. Click OK to send the configuration to the router, or click Cancel to
discard it. If you did not make this setting, clicking Finish sends the configuration
to the router.
The section
Create Easy VPN Remote Reference
about the screens you use.
The following topics describe the Create Easy VPN Remote screens:
Create Easy VPN Remote
•
Configure an Easy VPN Remote Client
•
•
Easy VPN Remote Wizard: Network Information
Easy VPN Remote Wizard: Identical Address Configuration
•
Easy VPN Remote Wizard: Interfaces and Connection Settings
•
Easy VPN Remote Wizard: Server Information
•
Easy VPN Remote Wizard: Authentication
•
Easy VPN Remote Wizard: Summary of Configuration
•
Cisco Router and Security Device Manager 2.5 User's Guide
Creating an Easy VPN Remote Connection
contains detailed information
12-3
Advertisement
Table of Contents
Troubleshooting
