Edit 802.1X Authentication - Cisco ROUTER-SDM-CD User Manual

802.1x Authentication on Layer 3 Interfaces
Edit
Untrusted User Policy
Exception List
Exempt Cisco IP phones from 802.1x authentication
Apply Changes
Discard Changes

Edit 802.1x Authentication

Cisco Router and Security Device Manager 2.5 User's Guide
4-10
Click Edit to open a window of editable 802.1x authentication parameters. The
parameters are the 802.1x authentication settings for the interface chosen in the
Interfaces table.
Choose a Virtual Template interface from the drop-down list. The chosen Virtual
Template interface represents the policy applied to clients that fail 802.1x
authentication.
Click the Details button to see more information about the chosen Virtual
Template interface.
For more information about the exception list, see
Check Exempt Cisco IP phones from 802.1x authentication to exempt Cisco IP
phones from 802.1x authentication while allowing them to use the VPN tunnel.
Click Apply Changes for the changes you made to take effect.
Click Discard Changes to erase the unapplied changes you made.
This window allows you to enable and change the default values for a number of
802.1x authentication parameters.
Chapter 4 802.1x Authentication
802.1x Exception List.
OL-4015-12