Existing Dynamic Dns Methods; Add Dynamic Dns Method - Cisco ROUTER-SDM-CD User Manual

Chapter 6 Edit Interface/Connection
Note

Existing Dynamic DNS Methods

Add Dynamic DNS Method

OL-4015-12
This feature appears only if supported by the Cisco IOS release on your router.
To choose a dynamic DNS method to use, do one of the following:
Enter the name of an existing dynamic DNS method.
•
Enter the name in the Dynamic DNS Method field exactly as it appears in the
list in Configure > Additional Tasks > Dynamic DNS Methods.
Choose an existing dynamic DNS method from a list.
•
Click the drop-down menu and choose an existing method. A window with a
list of existing dynamic DNS methods opens. This menu choice is available
only if there are existing dynamic DNS methods.
Create a new dynamic DNS method.
•
Click the drop-down menu and choose to create a new dynamic DNS method.
To clear an associated dynamic DNS method from the interface, choose None
from the drop-down menu.
This window allows you to choose a dynamic DNS method to associate with a
WAN interface.
The list of existing dynamic DNS methods shows each method's name and
associated parameters. Choose a method from the list, and then click OK to
associate it to the WAN interface.
To add, edit, or delete dynamic DNS methods, go to Configure > Additional
Tasks > Dynamic DNS Methods.
This window allows you to add a dynamic DNS method. Choose the type of
method, HTTP or IETF, and configure it.
Cisco Router and Security Device Manager 2.5 User's Guide
Connection: Ethernet for Routing
6-7