Cisco ROUTER-SDM-CD User Manual page 576

What Do You Want To Do?
If you want to:
Add a static route.
Edit a static route.
Delete a static route. Select the static route, and click Delete. Then, confirm
Delete all static
routes.
Note
Dynamic Routing
Cisco Router and Security Device Manager 2.5 User's Guide
25-2
Do this:
Click Add, and create the static route in the Add a Static
Route window.
Select the static route, and click Edit. Edit the route
information in the IP Static Route window.
When a route has been configured that SDM does not
support, the Edit button is disabled.
the deletion in the warning window.
Click Delete All. Then, confirm the deletion in the
warning window.
If SDM detects a previously configured static route entry that has the next hop
•
interface configured as the "Null" interface, then the static route entry will be
read-only.
If SDM detects a previously configured static route entry with "tag" or
•
"name" options, that entry will be read-only.
If you are configuring a Cisco 7000 router, and the interface used for a next
•
hop is unsupported, that route will be marked as read only.
Read-only entries cannot be edited or deleted using SDM.
•
This portion of the window allows you to configure RIP, OSPF, and EIGRP
dynamic routes.
Item Name
If no dynamic routes have been configured, this column contains the text RIP,
OSPF, and EIGRP. When one or more routes have been configured, this column
contains the parameter names for the type of routing configured.
Chapter 25 Routing
OL-4015-12