Add Or Edit Easy Vpn Remote: Identical Addressing - Cisco ROUTER-SDM-CD User Manual

Chapter 12 Easy VPN Remote
Table 12-14 Interfaces and Connection Settings Fields
Element
Manual
Interesting Traffic

Add or Edit Easy VPN Remote: Identical Addressing

Table 12-15 Identical Addressing Tab Fields
Element
Configure identical addressing
Loopback Interface
Loopback Interface
OL-4015-12
Description
Choose Manual if you want to bring up and shut down the VPN
tunnel manually. With the manual setting, you must click the
Connect or Disconnect button in the Edit Easy VPN Remote screen
to establish or take down the tunnel. Additionally, if a security
association (SA) timeout is set for the router, you will have to
manually reestablish the VPN tunnel whenever a timeout occurs.
You can change SA timeout settings in the VPN Components
Global Settings
Choose Interesting Traffic to establish the VPN tunnel whenever
outbound local (LAN side) traffic is detected. The Connect or
Disconnect button is disabled when you choose this Easy VPN
connection setting.
The Interesting Traffic option appears only if supported by
Note
the Cisco IOS image on your router.
In this screen, enter the information needed to configure identical addressing.
Identical addressing enables remote networks to reach local devices that have IP
addresses that might overlap with addresses in remote networks.
Field Reference
Description
Check Configure identical addressing if there are devices on the
local network with IP addresses that might overlap with addresses
in remote networks in your organization. You must check this box
to enable the other controls in this screen.
Click the down arrow to select an existing loopback interface. If no
loopback interfaces are configured, click Add.
Cisco Router and Security Device Manager 2.5 User's Guide
Administering Easy VPN Remote Connections
window.
VPN
12-37