Add An Http Inspection Class Map; Http Request Header - Cisco ROUTER-SDM-CD User Manual

Chapter 37 Cisco Common Classification Policy Language

Add an HTTP Inspection Class Map

Step 1
Step 2
Step 3
Step 4
Step 5

HTTP Request Header

Length Greater Than
Count Greater Than
OL-4015-12
HTTP inspection class maps allow you to make a wide variety of HTTP request,
response, and request response data available for inspection.
To create an HTTP inspection class map, follow these steps:
Enter a class name to identify the class map. You can also enter a description that
will be displayed in the HTTP Class Maps window.
Click the branch in the HTTP tree that contains the type of data you want to make
available for inspection. You can create a class map for HTTP requests, responses,
and request-responses.
Click the appropriate sub-branch to further specify the type of data you want to
include.
Configure the class map data in the fields displayed.
To specify match conditions, click Any conditions below if the class map must
match only one or more conditions. Click All the specified conditions below if
the class map must match all the conditions that you specified.
Enter class map criteria for HTTP request header attributes.
Click this box to specify a global request header length that a packet should not
exceed, and enter the number of bytes.
Click this box to specify a limit to the total number of request header fields that a
packet should not exceed, and enter the number of fields.
Cisco Router and Security Device Manager 2.5 User's Guide
Class Maps
37-13