Address Pools - Cisco ROUTER-SDM-CD User Manual

Chapter 26 Network Address Translation
Action
Access Lists
To Edit an Access List in a Route Map Entry

Address Pools

Pool Name
Address
OL-4015-12
Either permit or deny. Route maps created by Cisco SDM are configured with the
permit keyword. If this field contains the value deny, the route map was created
using the CLI.
This area shows the access lists associated with this entry. The route map uses
these access lists to determine which traffic to protect from NAT translation.
Choose the access list, and click Edit. Then edit the access list in the windows
displayed.
The Address Pools window shows the configured address pools that can be used
in dynamic NAT translation.
This field contains the name of the address pool. Use this name to refer to the pool
when configuring a dynamic NAT rule.
This field contains the IP address range in the pool. Devices whose IP addresses
match the access rule specified in the Add Address Translation Rule window will
be given private IP addresses from this pool.
Cisco Router and Security Device Manager 2.5 User's Guide
Network Address Translation Rules
26-15