More About VPN
More About VPN
Cisco.com Resources
Cisco Router and Security Device Manager 2.5 User's Guide
40-18
The inside source static network command with one of the keywords
•
"extendable", "no-alias", or "no-payload"
The outside source static network command with one of the keywords
•
"extendable", "no-alias", or "no-payload"
The inside source static tcp command with one of the keywords "no-alias"
•
or "no-payload"
The inside source static udp command with one of the keywords "no-alias"
•
or "no-payload"
The outside source static tcp command with one of the keywords "no-alias"
•
or "no-payload"
The outside source static udp command with one of the keywords "no-alias"
•
or "no-payload"
The inside source static command with one of the keywords "no-alias",
•
"no-payload", "extendable", "redundancy", "route-map", or "vrf"
The outside source static command with one of the keywords "no-alias",
•
"no-payload", "extendable", or "add-route"
The inside source static command with the keyword "esp"
•
The inside source static command with the interface command
•
A NAT dynamic rule is configured with the Loopback interface
These topics contain more information about VPN, DMVPN, IPSec and IKE.
The following links provide TAC resources and other information on VPN issues.
How Virtual Private Networks Work
•
Dynamic Multipoint IPSec VPNs
•
TAC-authored articles on IPSec
•
•
TAC-authored articles on Cisco SDM
Chapter 40
More About....
OL-4015-12