New Connection Reference; Create Connection - Cisco ROUTER-SDM-CD User Manual

New Connection Reference

New Connection Reference

Create Connection

Note
Table 2-1 Create Connection Fields
Element
Create New Connection
Cisco Router and Security Device Manager 2.5 User's Guide
2-2
The following topic describes the screen referred to in this chapter:
• Create Connection
This window allows you to create new LAN and WAN connections.
You cannot use Cisco SDM to create WAN connections for Cisco 7000 series
routers.
Field Reference
Table 2-1 describes the fields in this screen.
Description
Choose a connection type to configure on the physical interfaces
available on your router. Only interfaces that have not been
configured are available. If all interfaces have been configured, this
area of the window is not displayed.
If the router has Asynchronous Transfer Mode (ATM) or serial
interfaces, multiple connections can be configured from a single
interface because Cisco Router and Security Device Manager II
(Cisco SDM) configures subinterfaces for each interface of that
type.
The Other (Unsupported by Cisco SDM) radio button appears if an
unsupported logical or physical interface exists, or if a supported
interface exists that has been given an unsupported configuration.
When you click the Other (Unsupported by Cisco SDM) radio
button, the Create New Connection button is disabled.
Chapter 2 Creating a New Connection
OL-4015-12