Cisco ROUTER-SDM-CD User Manual page 544

Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
One-Step Lockdown
Cisco Router and Security Device Manager 2.5 User's Guide
24-2
The Welcome page of the Security Audit wizard appears.
Click Next>.
The Security Audit Interface Configuration page appears.
The Security Audit wizard needs to know which of your router interfaces connect
to your inside network and which connect outside of your network. For each
interface listed, check either the Inside or Outside check box to indicate where
the interface connects.
Click Next>.
The Security Audit wizard tests your router configuration to determine which
possible security problems may exist. A screen showing the progress of this action
appears, listing all of the configuration options being tested for, and whether or
not the current router configuration passes those tests.
If you want to save this report to a file, click Save Report.
Click Close.
The Security Audit Report Card screen appears, showing a list of possible security
problems.
Check the Fix it boxes next to any problems that you want Cisco Router and
Security Device Manager (Cisco SDM) to fix. For a description of the problem
and a list of the Cisco IOS commands that will be added to your configuration,
click the problem description to display a help page about that problem.
Click Next>.
The Security Audit wizard may display one or more screens requiring you to enter
information to fix certain problems. Enter the information as required and click
Next> for each of those screens.
The Summary page of the wizard shows a list of all the configuration changes that
Security Audit will make. Click Finish to deliver those changes to your router.
This option tests you router configuration for any potential security problems and
automatically makes any necessary configuration changes to correct any problems
found. The conditions checked for and, if needed, corrected are as follows:
Disable Finger Service
•
Chapter 24 Security Audit
OL-4015-12