Cisco ROUTER-SDM-CD User Manual page 313

Chapter 12 Easy VPN Remote
Table 12-7 Edit Easy VPN Remote Fields
Element
Add
Edit
Delete
Reset Connection
Test Tunnel
Connect or Disconnect or Login The name of this button changes based on the status of the chosen
OL-4015-12
Field Reference
Table 12-7 describes the fields and buttons in this screen.
Description
Click Add to create a new Easy VPN Remote connection.
Choose an Easy VPN Remote connection, and click Edit to modify
connection settings.
Choose an Easy VPN Remote connection, and click Delete to delete
the connection.
Choose an Easy VPN Remote connection, and click Reset
Connection to clear the current security association (SA) and create
a new one to reset the connection.
Choose an Easy VPN Remote connection, and click Test Tunnel to
send data through the VPN tunnel. Cisco SDM displays a message
indicating the results of the test.
Easy VPN Remote connection.
This button is labeled Connect if all of the following are true:
The connection uses manual tunnel control.
•
The tunnel is down.
•
The XAuth response is not set to be requested from a PC
•
browser session.
Click Connect to establish the connection.
This button is labeled Disconnect if all of the following are true:
The connection uses manual tunnel control.
•
The tunnel is up.
•
• The XAuth response is not set to be requested from a PC
browser session.
Click Disconnect to terminate the connection.
Cisco Router and Security Device Manager 2.5 User's Guide
Administering Easy VPN Remote Connections
12-19