Add Class For The New Policy - Cisco ROUTER-SDM-CD User Manual

Chapter 29 Quality of Service
Table 29-8 Class List Display Area (continued)
Element
Match
Classification
Action

Add Class for the New Policy

OL-4015-12
Description
Whether the QoS class looks for matches to Any or to All of the
selected DSCP values. If you choose Any, traffic must meet only
one of the match criteria. If you choose All, traffic must meet all of
the match criteria. The DSCP values chosen are displayed in the
DSCP column.
This portion of the display contains the following columns:
DSCP—The DSCP values that are chosen for possible match.
•
Protocols—The protocols included in this QoS class. A video
•
traffic QoS class might have protocols such as cuseeme,
netshow, and vdolive. A routing traffic QoS class might have
protocols such as BGP, EIGRP, and OSPF.
ACL—The name or number of an ACL that specifies the traffic
•
that this QoS class applies to.
This portion of the display contains the following columns:
Queuing—This column lists the queuing type, Class Based
•
Weighted Fair Queuing (CBWFQ), Low Latency Queuing
(LLQ), or Fair Queuing, and displays the bandwidth allocated
to the class.
Shaping—This column displays Yes if
•
for this policy, or No if shaping is not configured.
Policing—This column displays Yes if
•
for this policy, or No if policing is not configured.
Set DSCP—The DSCP value that is given to this type of traffic
•
by the QoS class.
Drop—The column displays Yes if this type of traffic is to be
•
dropped, or No if it is not to be dropped.
Add a traffic class for a new QoS policy in this screen.
Cisco Router and Security Device Manager 2.5 User's Guide
Editing QoS Policies
shaping is configured
policing is configured
29-13