Add Service Policy To Class - Cisco ROUTER-SDM-CD User Manual

Editing QoS Policies
Table 29-9 Add Class for New Policy
Element
Policy Name
Class Name
Classification
Match
Item Name
Item Value
Edit

Add Service Policy to Class

Cisco Router and Security Device Manager 2.5 User's Guide
29-14
Field Reference
Table 29-9 describes the fields in this screen.
Description
Enter a name for the QoS Policy.
Enter a name for the traffic class.
Specify whether the QoS class is to look for matches to Any or to
All of the selected criteria. If you choose Any, traffic must meet
only one of the match criteria. If you choose All, traffic must meet
all of the match criteria. The DSCP values chosen are displayed in
the DSCP column.
Any—Click Any to specify that traffic must meet only one of
•
the criteria specified in the classification list that you create.
All—Click All to specify that traffic must meet all the criteria
•
specified in the classification list that you create.
This column displays the types of criteria that you can include in
this traffic class. If the QoS policy uses NBAR protocol discovery,
you can specify protocol and ACL values. If the QoS policy uses
DSCP marking, you can specify DSCP values as well as protocol
and ACL values.
This column displays the values configured for the particular type,
separated by commas. For example, the Protocol row might show
the following values:
http, edonkey, dhcp
To add or edit the values for a particular type of entry, select the
type, and click Edit. Then, add or modify entries for type in the
displayed dialog.
In this screen, add an existing service policy to a QoS class.
Chapter 29 Quality of Service
OL-4015-12