Cisco ROUTER-SDM-CD User Manual page 41

Chapter 1 Home Page
Note
NAC Policies
Interface Column
The name of the interface to which the
policy is applied. For example,
FastEthernet 0, or Ethernet 0/0.
Routing
No. of Static
The number of static
Routes
routes configured on
the router.
Dynamic Lists any dynamic
Routing
routing protocols
Protocols
that are configured
on the router.
OL-4015-12
Some VPN servers or concentrators authenticate clients using Extended
•
Authentication (XAuth). This shows the number of VPN tunnels awaiting an
Xauth login. If any Easy VPN tunnel awaits XAuth login, a separate message
panel is shown with a Login button. Clicking Login allows you to enter the
credentials for the tunnel.
If Xauth has been configured for a tunnel, it will not begin to function until
•
the login and password has been supplied. There is no timeout after which it
will stop waiting; it will wait indefinitely for this information.
Active or Inactive
NAC Policy Column
The name of the NAC policy.
Intrusion
Prevention
Active Signatures
No. of IPS-enabled
interfaces
Cisco Router and Security Device Manager 2.5 User's Guide
The number of active
signatures the router is
using. These may be
built in, or they may be
loaded from a remote
location.
The number of router
interfaces on which IPS
has been enabled.
1-5